Detailed Product Description

Refrigeration Parts Spiral Oil Separator

Effection
Refrigeration compressor is using preparation oil of the crankcase or engine bodys circling to lubricate. When the compressor works,the refrigerant and the oil is hot,the compressed refrigerant is vapoured into a mixture, and leave the compressor.The low-volume oil by the circling wont take any influence on the performance of the system . But, too many circling oil will disturb the flow controller, evaporator, condenser and the drier filters operation.
In some low-temperatuere device, the refrigent oil will turn dense, and it is difficult to flow out from the evaporator. If the refrigerant oil accumulated in the evaporator, it will take influence on the benifit of the evaporator, and cause the troubles of the compressor.
It will install a oil separator between the compressor and condenser to will protect the refrigerant system. Using the oil separator will keep a right oil level inside the compressor, reduce the oils liquid collision, and add the benifit of the evaporator. All the benifit will reduce the electrical cost of system.

Fuction
The mixture of the refrigerant and oil, which comes from the compressor, will enter the oil separators inlet. The mixture will through a drier filter, baffle and block device,and the pinpoint of the oil will gathered,and fall down to the bottom of separator. The refrigerant gas will pass through the drier filter s outlet, and separate the remained oil pinpoints, then it will enter into the condenser in a oilless status. The refrigerant oil will be gathered at the bottom of the oil saparator, to a certain degree, a needle valve which operated by a floating ball, will opened automatically,let the oil return to the compressor. Because of the pressure in the oil separator is higher than the crankcase, so the oil will return to the compressor very quickly. When the oil level falls down, the needle valve will be closed to prevent the refrigerant gas return to the compressor.

Technical datas
Refrigerant: R22/R134a/R404A/R407C/R502/R507
Medium temperature: -40 to +120
Max working Pressure:3100Kpa.
Destructive testing reached 17.5 to 19Mpa.
The thickness of paint film: 50 to 80u m.
Oil Storage: 55824→559011/ 5301→5305 600ml
569011→569417 /6303→6305 800ml

Three Dimensional Datas